Sachs 505 Engine Bearing, Seals & Rings

Bearings:

  • 15 x 35 x 11 (6202 C3)  2 ea

Seals:

  • 15 x 30 x 5.5 1 ea
  • 15 x 32 x 5.5 1 ea
  • 15 x 35 x 7  1 ea

Rings (505-1A engine):

  • 38mm x ** Center Pin/GI  2 ea

**Actual bore of a stock Sachs 505-1A engine is 37.98mm. Due to normal cylinder wear, 38mm rings usually work perfect. May need to file to adjust gap. Thickness can also be different between the upper and lower rings. Usually the top ring is 1.5mm thick while the bottom is a 2mm thick but best to measure before ordering.

Rings (504-1C or 505-1D engine):

  • 38mm x ** Center Pin/GI  2 ea

**Actual bore of a stock Sachs 505-1C/D engine is 37.80mm. Due to normal cylinder wear, 39mm rings usually work perfect. May need to file to adjust gap. Thickness can also be different between the upper and lower rings. Usually the top ring is 1.5mm thick while the bottom is a 2mm thick but best to measure before ordering.